Kearns Foundation Pros
Concrete Lifting in Kearns, UT
Polyurethane concrete lifting (polyjacking) in Kearns, UT levels sunken slabs same day, without tear-out cost. Free estimate.
Serving Kearns and nearby communities.
Polyurethane concrete lifting, often called polyjacking, is the modern alternative to mudjacking and full tear-out replacement. A technician drills dime-sized holes into a sunken slab, injects hydrophobic foam underneath, and the slab rises back to level as the foam expands and cures. It's the hub method behind driveway, patio, and sidewalk lifting in Kearns, where decades of freeze-thaw cycling settle slab sections unevenly.
Kearns Foundation Pros uses polyjacking because it's faster, lighter on the surrounding soil, and typically costs a fraction of tearing out and repouring concrete.
Materials
Materials and methods for Concrete Lifting
Polyurethane Foam
Expands beneath slabs to lift and stabilize concrete surfaces without adding excess weight to the soil.
Injection Ports
Allow controlled placement of lifting material under the slab at precise points.
Patch Compound
Fills drilled access holes for a smooth finish matching the surrounding surface.
Surface Sealant
Protects the repaired area from moisture and staining through winter cycles.
Leveling Gauge
Used to measure and confirm slab elevation during lifting for accuracy.
Bonding Agent
Improves adhesion between new patch material and existing concrete.
Questions on materials?
Get a Free EstimateHow it works
How our Concrete Lifting process works
Step 1Surface Assessment
Uneven or sunken concrete areas are identified and measured.
Step 2Drilling Access Holes
Small holes are drilled into the concrete to allow material injection.
Step 3Material Injection
Expanding foam is injected beneath the slab to raise it evenly.
Step 4Elevation Monitoring
Lift progress is measured to achieve the desired level.
Step 5Hole Patching
Access holes are filled and finished to match the surrounding surface.
Step 6Final Inspection
The lifted area is reviewed for levelness and stability.
Cost
What does concrete lifting cost in Kearns?
Cost depends on slab size, how many sections need lifting, and injection depth required to reach solid base soil. Polyjacking typically runs well below full tear-out and replacement cost. Get a free estimate for your specific slab.
| Project type | Typical range | What’s included |
|---|---|---|
| Single panel lift | $400-$900 | one sunken slab section leveled. |
| Multi-panel lift | $1,000-$2,500 | several adjoining slab sections. |
| Large area lift | $2,500-$5,000 | full driveway or extensive patio coverage. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Concrete Lifting
Concrete lifting is generally permit-exempt as non-structural repair, but confirm with Salt Lake County if your project is near a public right-of-way.
| Typically needs a permit | Often no permit |
|---|---|
| None typically | Standard driveway |
| since concrete lifting is non-structural repair | patio |
| — | sidewalk polyjacking |
| — | Access hole drilling and foam injection work |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Concrete Lifting
| DIY | Hire a pro |
|---|---|
| A small DIY foam kit for a minor gap or trip edge, if you're comfortable with the limited control over lift amount | Any larger slab or driveway section, since pressure-controlled injection equipment achieves a level, even lift |
| — | Slabs near utility lines or structures, where injection pressure needs careful management |
| — | Situations where the slab has cracked or shifted significantly |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Concrete Lifting
Call if you notice sinking slab sections, trip hazards at joints, or gaps forming where concrete meets a structure. Get a free estimate for a same-day lift .
Seeing warning signs?
Get a Free EstimateFAQs
Concrete Lifting FAQs
Is polyurethane foam lifting actually as good as mudjacking or replacement?
Polyurethane foam lifts faster, weighs far less than mudjacking slurry, and typically costs a fraction of full tear-out replacement while achieving the same level result.
How long does polyjacking take?
Most single slab sections lift and cure within a few hours, often letting the area be used again the same day.
Will the holes be visible after the repair?
Patched holes are filled with matching compound and blend closely with the surrounding surface, though a slight color difference can remain.
Does concrete lifting fix the underlying cause of settlement?
Lifting levels the slab itself; if the settlement is tied to erosion or drainage issues, addressing that separately helps prevent recurrence.
Can concrete lifting be done in cold weather?
Polyurethane foam cures reliably in cooler temperatures, making it workable through most of the year in Utah's climate.
Is concrete lifting cheaper than replacement?
Polyjacking commonly runs well below the cost of demolition and repour for comparable slab areas.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Kearns using piering, crack injection, and wall stabilization, with free estimates and written scopes.
Piering and Underpinning
Steel and helical pier underpinning in Kearns, UT stops ongoing settlement in older homes. Free estimate on deep foundation support.
Wall Stabilization
Steel wall anchors and carbon fiber straps stabilize bowing basement walls in Kearns, UT. Stop spring snowmelt pressure. Free estimate.
Ask about Concrete Lifting
Tell us about the project and how to reach you.