Kearns Foundation Pros logoKearns Foundation ProsFoundation Repair · Kearns, UT
Menu
driveway lifting in Kearns, UT

Kearns Foundation Pros

Driveway Lifting in Kearns, UT

Driveway lifting in Kearns with polyurethane foam injection, same-day leveling, and no mudjacking mess. Free estimate.

Serving Kearns and nearby communities.

A sunken driveway slab isn't just cosmetic, it's usually sub-grade soil that washed out or compacted unevenly under the weight of the slab. Kearns driveways poured over original 1950s-60s base material see this more as decades of freeze-thaw cycling work voids into the soil beneath the concrete. Kearns Foundation Pros lifts those slabs back to grade with polyurethane foam injection instead of tearing out and repouring.

Most driveway lifts are a same-day fix with no curing wait before you can park on it again.

How it works

How our Driveway Lifting process works

  1. Driveway Inspection photo
    Step 1

    Driveway Inspection

    Sunken or sloped sections are identified for correction.

  2. Access Drilling photo
    Step 2

    Access Drilling

    Small holes are drilled at strategic points along the driveway.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Expanding foam is pumped beneath the slab to raise it evenly.

  4. Slope Correction photo
    Step 4

    Slope Correction

    The surface is adjusted to restore proper drainage direction.

  5. Hole Sealing photo
    Step 5

    Hole Sealing

    Drilled holes are patched to blend with the existing surface.

  6. Surface Review photo
    Step 6

    Surface Review

    The driveway is inspected for even, stable elevation.

Materials

Materials and methods for Driveway Lifting

Kearns driveways deal with repeated winter freeze and spring thaw, so we lean on materials that won't wash out again the next wet season.

  • Polyurethane Foam photo

    Polyurethane Foam

    Provides lightweight lift without adding excess weight to the soil, which matters on older sub-grade fill around Kearns.

  • Concrete Patch Mix photo

    Concrete Patch Mix

    Used to seal access holes after injection work so the surface reads clean, not drilled.

  • Joint Sealant photo

    Joint Sealant

    Reseals expansion joints disturbed during the lifting process to keep water from re-entering the void.

  • Surface Sealer photo

    Surface Sealer

    Protects the driveway from moisture and future cracking through another Utah winter.

  • Leveling Equipment photo

    Leveling Equipment

    Ensures accurate measurement during the lifting procedure so the slab matches the garage threshold.

  • Bonding Primer photo

    Bonding Primer

    Improves patch adhesion to the original concrete surface for a repair that holds.

What's included

What's included with Driveway Lifting

Typically included: slab inspection, access drilling, foam injection, slope correction, hole patching, final level check.

Optional: joint resealing along the garage apron, surface sealer application for extra moisture protection.

Customer prep: clear vehicles and loose items off the driveway before the crew arrives.

Timeline

How long does driveway lifting take?

Most residential driveway lifts wrap up in a single visit from inspection to patched holes.

  1. 01

    Inspection and marking

    30 minutes

  2. 02

    Drilling and foam injection

    1–2 hours
  3. 03

    Patching and surface check

    30 minutes

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Driveway Lifting

Driveway slab lifting is a non-structural repair , but always confirm with Salt Lake County before work begins.

Typically needs a permitOften no permit
Full driveway replacement or regrading tied to structural approach workPolyurethane foam lifting of an existing slab
—Joint resealing and surface patching
—Spot leveling at a sunken section

DIY vs pro

DIY vs hiring a pro for Driveway Lifting

DIYHire a pro
Filling a small surface crack with store-bought concrete caulkSinking slab sections near the garage door
Patching a minor chip at a slab edgeUneven panels creating a trip hazard at the street
—Any lift requiring controlled foam pressure to avoid cracking the slab

When to call

When to call for Driveway Lifting

Call if you're seeing a slab sinking near the garage apron, a visible gap where the driveway meets the garage floor, or standing water pooling after it rains. Kearns Foundation Pros offers a free estimate to look at the slope and recommend the right fix.

FAQs

Driveway Lifting FAQs

What causes a driveway to sink near the garage door?

Soil under the slab compacts or washes out over time, especially after repeated freeze-thaw cycles, leaving a void the concrete settles into.

How much does driveway lifting cost in Kearns?

Most jobs run a few hundred to a couple thousand dollars depending on slab size and how many access points are needed. A free estimate gives you an exact number.

Is polyurethane foam as durable as mudjacking?

Foam is lighter, cures faster, and resists water absorption better than traditional mudjacking mix, which is why most of our crews use it instead.

Can I lift a driveway myself with a DIY kit?

Small retail kits exist, but uneven injection pressure can crack a slab. Pro equipment controls pressure and lift rate to avoid that.

How long before I can drive on a lifted driveway?

Most slabs can handle vehicle weight the same day since the foam sets fast.

Will lifting fix drainage that pools toward my garage?

Slope correction is part of the process, the slab is releveled to redirect water away from the garage opening.

Ask about Driveway Lifting

Tell us about the project and how to reach you.

Call (435) 267-0513